PartsTable / COMPONENT / N49196
N49196
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, length: 0.719 INCHES NOMINAL IN, material: STEEL COMP 1045 OVERALL, hole_diameter: 0.150 INCHES NOMINAL IN, overall_height: 0.703 INCHES NOMINAL IN, mounting_method: DIMPLED HOLE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-584-6091, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
N49196
NSN: 5340-00-584-6091 FSC: 5340 CAGE: 61864 — TRW ASSEMBLIES AND FASTENERS GROUP (USA)
SPECIFICATIONS
width 0.500 INCHES NOMINAL IN length 0.719 INCHES NOMINAL IN material STEEL COMP 1045 OVERALL hole_diameter 0.150 INCHES NOMINAL IN overall_height 0.703 INCHES NOMINAL IN mounting_method DIMPLED HOLE surface_treatment PHOSPHATE OVERALL loop_opening_width 0.063 INCHES NOMINAL IN material_thickness 0.025 INCHES NOMINAL IN material_document_and_classification SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL NSN 5340-00-584-6091
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: N49196
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SURFACE TREATMENT: PHOSPHATE OVERALL
• LENGTH: 0.719 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
• WIDTH: 0.500 INCHES NOMINAL IN
• LOOP OPENING WIDTH: 0.063 INCHES NOMINAL IN
• HOLE DIAMETER: 0.150 INCHES NOMINAL IN
• MOUNTING METHOD: DIMPLED HOLE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT PHOSPHATE OVERALL LENGTH 0.719 INCHES NOMINAL IN MATERIAL THICKNESS 0.025 INCHES NOMINAL IN WIDTH 0.500 INCHES NOMINAL IN LOOP OPENING WIDTH 0.063 INCHES NOMINAL IN HOLE DIAMETER 0.150 INCHES NOMINAL IN OVERALL HEIGHT 0.703 INCHES NOMINAL IN MOUNTING METHOD DIMPLED HOLE MATERIAL DOCUMENT AND CLASSIFICATION SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL MATERIAL STEEL COMP 1045 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
49196 Interchangeable interchangeable cross-reference
interchangeable
RE49F173 Interchangeable interchangeable cross-reference
interchangeable
842A Interchangeable interchangeable cross-reference
interchangeable
4L420 Interchangeable interchangeable cross-reference
interchangeable
FA42 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy N49196?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N49196?
N49196 is a CLIP,SPRING TENSION.
What parts can replace N49196?
There are 5 known substitutes for N49196: 49196, RE49F173, 842A and 2 more. Substitute compatibility should be verified for your specific system.
Is N49196 still available?
N49196 is currently cancelled.