PartsTable
Technical Data Sheet
Download PDF

N466PC87 — LOCKNUT,TUBE FITTING

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

N466PC87: LOCKNUT,TUBE FITTING.

The LOCKNUT,TUBE FITTING is a the manufacturer industrial component. Key specifications include material: STEEL OR IRON OVERALL, flange_diameter: 2.673 INCHES MINIMUM AND 2.682 INCHES MAXIMUM IN, special_features: FURNISHED W/ONE STUD,ONE NUT AND ONE COTTER PIN, style_designator: PLAIN FLANGED, under_flange_height: 0.375 INCHES NOMINAL IN, body_inside_diameter: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4820-00-413-2145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N466PC87
NSN: 4820-00-413-2145
FSC: 4820 — Valves, Nonpowered
CAGE: 30760 — INGERSOLL RAND CO (USA)
SPECIFICATIONS
materialSTEEL OR IRON OVERALL
flange_diameter2.673 INCHES MINIMUM AND 2.682 INCHES MAXIMUM IN
special_featuresFURNISHED W/ONE STUD,ONE NUT AND ONE COTTER PIN
style_designatorPLAIN FLANGED
under_flange_height0.375 INCHES NOMINAL IN
body_inside_diameter0.500 INCHES NOMINAL IN
fsc_application_dataVALVE,AIR COMPRESSOR
body_outside_diameter2.438 INCHES NOMINAL IN
seating_surface_shapeFLAT
seal_accommodation_typeGROOVED
flange_seat_to_disk_end_height0.266 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN4820-00-413-2145
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: N466PC87 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE SEAT TO DISK END HEIGHT: 0.266 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
FLANGE DIAMETER: 2.673 INCHES MINIMUM AND 2.682 INCHES MAXIMUM IN
•
FSC APPLICATION DATA: VALVE,AIR COMPRESSOR
•
BODY OUTSIDE DIAMETER: 2.438 INCHES NOMINAL IN
•
SEAL ACCOMMODATION TYPE: GROOVED
•
STYLE DESIGNATOR: PLAIN FLANGED
•
BODY INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE SEAT TO DISK END HEIGHT0.266 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
FLANGE DIAMETER2.673 INCHES MINIMUM AND 2.682 INCHES MAXIMUM IN
FSC APPLICATION DATAVALVE,AIR COMPRESSOR
BODY OUTSIDE DIAMETER2.438 INCHES NOMINAL IN
SEAL ACCOMMODATION TYPEGROOVED
STYLE DESIGNATORPLAIN FLANGED
BODY INSIDE DIAMETER0.500 INCHES NOMINAL IN
SPECIAL FEATURESFURNISHED W/ONE STUD,ONE NUT AND ONE COTTER PIN
UNDER FLANGE HEIGHT0.375 INCHES NOMINAL IN
MATERIALSTEEL OR IRON OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
N610PC87Reference document
Same NSN cross-reference
Reference document — Secondary reference
22K5RReference document
Same NSN cross-reference
Reference document — Design control — primary reference
F2435PC9Reference document
Same NSN cross-reference
Reference document — Secondary reference
N297PC9Reference document
Same NSN cross-reference
Reference document — Secondary reference
N545PC87Reference document
Same NSN cross-reference
Reference document — Secondary reference
H5657PC37Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N466PC87?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N466PC87?
N466PC87 is a LOCKNUT,TUBE FITTING.
What parts can replace N466PC87?
There are 6 known substitutes for N466PC87: N610PC87, 22K5R, F2435PC9 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N466PC87?
N466PC87 is cataloged in the U.S. Government catalog under NSN 4820-00-413-2145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N466PC87

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.