PartsTable
Technical Data Sheet
Download PDF

N4003035BM — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

N4003035BM: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440A OVERALL A, bore_shape: STRAIGHT, bore_diameter: 1.3122 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.2802 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-039-6711, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N4003035BM
NSN: 3110-01-039-6711
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: C2463 — RHEINMETALL SOLDIER ELECTRONICS GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 440A OVERALL A
bore_shapeSTRAIGHT
bore_diameter1.3122 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.2802 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN
outer_ring_width0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter1.7496 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMOLDED
standard_tolerance_designationABEC NO.5
NSN3110-01-039-6711
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: N4003035BM · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MOLDED
•
OUTER RING WIDTH: 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 1.7496 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMOLDED
OUTER RING WIDTH0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL OUTSIDE DIAMETER1.7496 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.5
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy N4003035BM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N4003035BM?
N4003035BM is a BEARING,BALL,ANNULAR.
What is the NSN for N4003035BM?
N4003035BM is cataloged in the U.S. Government catalog under NSN 3110-01-039-6711. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N4003035BM