PartsTable
Technical Data Sheet
Download PDF

N38251K — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

N38251K: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.469 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 1.500 INCHES MINIMUM IN, fastener_length: 3.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-022-4825, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N38251K
NSN: 5305-00-022-4825
FSC: 5305 — Screws
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.469 INCHES NOMINAL IN
thread_class2A A
thread_length1.500 INCHES MINIMUM IN
fastener_length3.000 INCHES NOMINAL IN
hardness_rating45.0 ROCKWELL C MINIMUM OVERALL
thread_directionRIGHT-HAND
width_between_flats0.875 INCHES NOMINAL IN
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch18
thread_series_designatorUNF
NSN5305-00-022-4825
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: N38251K · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.469 INCHES NOMINAL IN
•
FASTENER LENGTH: 3.000 INCHES NOMINAL IN
•
THREAD LENGTH: 1.500 INCHES MINIMUM IN
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM OVERALL
•
SHANK UNTHREADED HOLE DIAMETER: 0.140 INCHES NOMINAL FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.469 INCHES NOMINAL IN
FASTENER LENGTH3.000 INCHES NOMINAL IN
THREAD LENGTH1.500 INCHES MINIMUM IN
HARDNESS RATING45.0 ROCKWELL C MINIMUM OVERALL
SHANK UNTHREADED HOLE DIAMETER0.140 INCHES NOMINAL FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.875 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
224825Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
FFS85TYPE2STYLE10PReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy N38251K?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N38251K?
N38251K is a SCREW,CAP,HEXAGON HEAD.
What parts can replace N38251K?
There are 2 known substitutes for N38251K: 224825, FFS85TYPE2STYLE10P. Substitute compatibility should be verified for your specific system.
What is the NSN for N38251K?
N38251K is cataloged in the U.S. Government catalog under NSN 5305-00-022-4825. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N38251K