PartsTable
Technical Data Sheet
Download PDF

N38060 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

N38060: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL EXCEPT INSERT, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), locking_feature: PREVAILING TORQUE WITH NONMETALLIC INSERT, thread_direction: RIGHT-HAND, surface_treatment: CADMIUM OVERALL EXCEPT INSERT. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-408-4838, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N38060
NSN: 5310-01-408-4838
NIINs: 014084838, 015043399
FSC: 5310 — Nuts and Washers
CAGE: 35795 — LESLIE CONTROLS, INC. DBA LESLIE CONTROLS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL EXCEPT INSERT
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL EXCEPT INSERT
nominal_thread_size0.190 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch32
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsMATERIAL WILL BE IN ACCORDANCE WITH NAVICP ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATION
NSN5310-01-408-4838
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N38060 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
•
SURFACE TREATMENT: CADMIUM OVERALL EXCEPT INSERT
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 32
•
MATERIAL: STEEL OVERALL EXCEPT INSERT
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
SURFACE TREATMENTCADMIUM OVERALL EXCEPT INSERT
THREAD CLASS2B
THREAD QUANTITY PER INCH32
MATERIALSTEEL OVERALL EXCEPT INSERT
MATERIALPLASTIC POLYAMIDE NYLON LOCKING INSERT
BEARING SURFACE TYPECHAMFERED
SUBSTITUTES & CROSS-REFERENCES 1
38060Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy N38060?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N38060?
N38060 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace N38060?
There is 1 known substitute for N38060: 38060. Substitute compatibility should be verified for your specific system.
What is the NSN for N38060?
N38060 is cataloged in the U.S. Government catalog under NSN 5310-01-408-4838. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N38060