PartsTable / O-RING / N3732
N3732
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, outside_diameter: 5.086 INCHES MINIMUM AND 5.172 INCHES MAXIMUM IN, center_hole_diameter: 4.966 INCHES MINIMUM AND 5.012 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-425-3299, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
N3732
NSN: 5331-00-425-3299 FSC: 5331 — O-RINGCAGE: D9135 — BAUER KOMPRESSOREN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR temp_rating -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF outside_diameter 5.086 INCHES MINIMUM AND 5.172 INCHES MAXIMUM IN center_hole_diameter 4.966 INCHES MINIMUM AND 5.012 INCHES MAXIMUM IN cross-sectional_height 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN NSN 5331-00-425-3299
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: N3732
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 5.086 INCHES MINIMUM AND 5.172 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 4.966 INCHES MINIMUM AND 5.012 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 5.086 INCHES MINIMUM AND 5.172 INCHES MAXIMUM IN CENTER HOLE DIAMETER 4.966 INCHES MINIMUM AND 5.012 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TEMP RATING -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
56800 Interchangeable interchangeable cross-reference
interchangeable
21742-000 Interchangeable interchangeable cross-reference
interchangeable
H23422 Interchangeable interchangeable cross-reference
interchangeable
56798 Interchangeable interchangeable cross-reference
interchangeable
568049 Interchangeable interchangeable cross-reference
interchangeable
05680493 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy N3732?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N3732?
N3732 is a O-RING.
What parts can replace N3732?
There are 15 known substitutes for N3732: 56800, 21742-000, H23422 and 12 more. Substitute compatibility should be verified for your specific system.
Is N3732 still available?
N3732 is currently cancelled.