PartsTable
Technical Data Sheet
Download PDF

N27036PC15 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

N27036PC15: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, diameter: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN, head_style: FLAT, chamfer_length: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN, style_designator: STRAIGHT, features_provided: CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-281-7247, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N27036PC15
NSN: 5315-00-281-7247
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 55380 — HATCH & KIRK, INC. (USA)
SPECIFICATIONS
height0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
diameter0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
materialSTEEL COMP 1115 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1112 OR STEEL COMP 1113 OVERALL
head_styleFLAT
chamfer_length0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
style_designatorSTRAIGHT
features_providedCASEHARDENED
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
under_head_length1.084 INCHES MINIMUM AND 1.104 INCHES MAXIMUM IN
first_hole_diameter0.1185 INCHES MINIMUM AND 0.1385 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-281-7247
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N27036PC15 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.084 INCHES MINIMUM AND 1.104 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.1185 INCHES MINIMUM AND 0.1385 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
DIAMETER: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.084 INCHES MINIMUM AND 1.104 INCHES MAXIMUM IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.1185 INCHES MINIMUM AND 0.1385 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
DIAMETER0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEFLAT
SUBSTITUTES & CROSS-REFERENCES 9
N12878PC48Reference document
Same NSN cross-reference
Reference document — Secondary reference
N12873PC7Reference document
Same NSN cross-reference
Reference document — Secondary reference
N9177PC17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
N9678PC17Reference document
Same NSN cross-reference
Reference document — Secondary reference
N4873PC12Reference document
Same NSN cross-reference
Reference document — Secondary reference
N8873PC12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N27036PC15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N27036PC15?
N27036PC15 is a PIN,STRAIGHT,HEADED.
What parts can replace N27036PC15?
There are 9 known substitutes for N27036PC15: N12878PC48, N12873PC7, N9177PC17 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N27036PC15?
N27036PC15 is cataloged in the U.S. Government catalog under NSN 5315-00-281-7247. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N27036PC15

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.