PartsTable
Technical Data Sheet
Download PDF

N25300PC4 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

N25300PC4: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, hardness_rating: 80.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-010-3028, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N25300PC4
NSN: 5310-00-010-3028
FSC: 5310 — Nuts and Washers
CAGE: 72915 — GENERAL MOTORS CORP ELECTRO-MOTIVE DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
hardness_rating80.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
width_across_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_size0.500 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch20
nondefinitive_spec/std_data2 TYPE AND 4 STYLE AND B GRADE
NSN5310-00-010-3028
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N25300PC4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 4 STYLE AND B GRADE
•
NUT HEIGHT: 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD SERIESUNF
HARDNESS RATING80.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 4 STYLE AND B GRADE
NUT HEIGHT0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH20
SUBSTITUTES & CROSS-REFERENCES 8
72MCA1Reference document
Same NSN cross-reference
Reference document — Secondary reference
62.90.052Reference document
Same NSN cross-reference
Reference document — Secondary reference
103028Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
N18Reference document
Same NSN cross-reference
Reference document — Secondary reference
804741Reference document
Same NSN cross-reference
Reference document — Secondary reference
43N3938-6240Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy N25300PC4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N25300PC4?
N25300PC4 is a NUT,PLAIN,HEXAGON.
What parts can replace N25300PC4?
There are 8 known substitutes for N25300PC4: 72MCA1, 62.90.052, 103028 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N25300PC4?
N25300PC4 is cataloged in the U.S. Government catalog under NSN 5310-00-010-3028. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N25300PC4