PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N25139PC11
N25139PC11 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.156 INCHES NOMINAL IN, diameter: 0.497 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN, material: STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1022 OR STEEL COMP 1113 OVERALL, head_style: FLAT, chamfer_length: 0.109 INCHES NOMINAL IN, style_designator: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-281-7248, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N25139PC11
NSN: 5315-00-281-7248
FSC: 5315
CAGE: 55380 — HATCH & KIRK, INC. (USA)
SPECIFICATIONS
height0.156 INCHES NOMINAL IN
diameter0.497 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
materialSTEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1022 OR STEEL COMP 1113 OVERALL
head_styleFLAT
chamfer_length0.109 INCHES NOMINAL IN
style_designatorSTRAIGHT
features_providedCASEHARDENED
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.625 INCHES NOMINAL IN
under_head_length1.406 INCHES NOMINAL IN
first_hole_diameter0.1406 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-281-7248
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N25139PC11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.109 INCHES NOMINAL IN
•
FEATURES PROVIDED: CASEHARDENED
•
HEIGHT: 0.156 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
PIN HEAD DIAMETER: 0.625 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 1.406 INCHES NOMINAL IN
•
DIAMETER: 0.497 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
•
FIRST HOLE DIAMETER: 0.1406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CHAMFER LENGTH0.109 INCHES NOMINAL IN
FEATURES PROVIDEDCASEHARDENED
HEIGHT0.156 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
PIN HEAD DIAMETER0.625 INCHES NOMINAL IN
UNDER HEAD LENGTH1.406 INCHES NOMINAL IN
DIAMETER0.497 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
FIRST HOLE DIAMETER0.1406 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
HEAD STYLEFLAT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
6477-32Interchangeable
interchangeable cross-reference
interchangeable
50055Interchangeable
interchangeable cross-reference
interchangeable
S1616Interchangeable
interchangeable cross-reference
interchangeable
3235020Interchangeable
interchangeable cross-reference
interchangeable
00540Interchangeable
Hazmat Cntmt Bag 5G
interchangeable
627-0913BInterchangeable
Hazmat Cntmt Bag 5G
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N25139PC11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N25139PC11?
N25139PC11 is a PIN,STRAIGHT,HEADED.
What parts can replace N25139PC11?
There are 16 known substitutes for N25139PC11: 6477-32, 50055, S1616 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N25139PC11?
N25139PC11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-281-7248. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N25139PC11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026