PartsTable
Technical Data Sheet
Download PDF

N25058PC15 — PIN,GROOVED,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

N25058PC15: PIN,GROOVED,HEADED.

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.062 INCHES NOMINAL IN, diameter: 0.183 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT, undercut_width: 0.062 INCHES NOMINAL IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-276-4156, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N25058PC15
NSN: 5315-00-276-4156
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 55380 — HATCH & KIRK, INC. (USA)
SPECIFICATIONS
height0.062 INCHES NOMINAL IN
diameter0.183 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT
undercut_width0.062 INCHES NOMINAL IN
first_end_styleCHAMFERED
hardness_rating54.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
style_designatorGROOVE
pin_head_diameter0.207 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
under_head_length0.438 INCHES NOMINAL IN
undercut_diameter0.173 INCHES MINIMUM AND 0.174 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
NSN5315-00-276-4156
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N25058PC15 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.062 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.173 INCHES MINIMUM AND 0.174 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 0.438 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 54.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: GROOVE
•
PIN HEAD DIAMETER: 0.207 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.062 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
UNDERCUT DIAMETER0.173 INCHES MINIMUM AND 0.174 INCHES MAXIMUM IN
UNDER HEAD LENGTH0.438 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
HARDNESS RATING54.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER0.207 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
DIAMETER0.183 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 3
5226720Reference document
Same NSN cross-reference
Reference document — Secondary reference
8075299PC5226720Reference document
Same NSN cross-reference
Reference document — Secondary reference
8075297PC5226720Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N25058PC15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N25058PC15?
N25058PC15 is a PIN,GROOVED,HEADED.
What parts can replace N25058PC15?
There are 3 known substitutes for N25058PC15: 5226720, 8075299PC5226720, 8075297PC5226720. Substitute compatibility should be verified for your specific system.
What is the NSN for N25058PC15?
N25058PC15 is cataloged in the U.S. Government catalog under NSN 5315-00-276-4156. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N25058PC15