PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N23471
N23471 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 OVERALL, special_features: COUNTERSUNK BOTH ENDS15 DEGRESS BY 0.062 LONG; THE SURFACE FINISH OF I.D. IS 32 MICRO INCHES, peripheral_diameter: 1.372 INCHES NOMINAL IN, center_hole_diameter: 0.781 INCHES NOMINAL IN, cross-sectional_height: 0.250 INCHES NOMINAL IN, cross-sectional_shape_style: SQUARE/RECTANGULAR.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-235-6524, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N23471
NSN: 5330-01-235-6524
FSC: 5330
CAGE: 35795 — LESLIE CONTROLS, INC. DBA LESLIE CONTROLS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 OVERALL
special_featuresCOUNTERSUNK BOTH ENDS15 DEGRESS BY 0.062 LONG; THE SURFACE FINISH OF I.D. IS 32 MICRO INCHES
peripheral_diameter1.372 INCHES NOMINAL IN
center_hole_diameter0.781 INCHES NOMINAL IN
cross-sectional_height0.250 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationASTM A276 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5330-01-235-6524
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N23471 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OVERALL
•
PERIPHERAL DIAMETER: 1.372 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.781 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A276 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OVERALL
PERIPHERAL DIAMETER1.372 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.781 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A276 ASSN STD ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
SPECIAL FEATURESCOUNTERSUNK BOTH ENDS15 DEGRESS BY 0.062 LONG; THE SURFACE FINISH OF I.D. IS 32 MICRO INCHES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
4Q-250Interchangeable
interchangeable cross-reference
interchangeable
LT-250Interchangeable
interchangeable cross-reference
interchangeable
1-1250Interchangeable
interchangeable cross-reference
interchangeable
115-20Interchangeable
interchangeable cross-reference
interchangeable
7611101P97Interchangeable
interchangeable cross-reference
interchangeable
14450Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N23471?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N23471?
N23471 is a RETAINER,PACKING.
What parts can replace N23471?
There are 13 known substitutes for N23471: 4Q-250, LT-250, 1-1250 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N23471?
N23471 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-235-6524. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N23471

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026