PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N22P22024C6
N22P22024C6 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.875 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN, fastener_length: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, hardness_rating: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-225-9093, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N22P22024C6
NSN: 5305-00-225-9093
FSC: 5305
CAGE: 03538 — LOCKHEED MARTIN CORPORATION DIV RMS (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_class2A A
thread_length0.875 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
fastener_length1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_diameter0.312 INCHES IN
minimum_tensile_strength120000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch24
NSN5305-00-225-9093
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: N22P22024C6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL: STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1524 OR STEEL COMP 1527 OR STEEL COMP 1536 OR STEEL COMP 1541 OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 5 GRADE
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD QUANTITY PER INCH: 24
•
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J429 ASSN STD ALL MATERIAL RESPONSES OVERALL
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
MATERIALSTEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1524 OR STEEL COMP 1527 OR STEEL COMP 1536 OR STEEL COMP 1541 OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 5 GRADE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD QUANTITY PER INCH24
WIDTH BETWEEN FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD LENGTH0.875 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
15608Interchangeable
interchangeable cross-reference
interchangeable
SK360Interchangeable
interchangeable cross-reference
interchangeable
16817Interchangeable
interchangeable cross-reference
interchangeable
MML736Interchangeable
interchangeable cross-reference
interchangeable
S2333Interchangeable
interchangeable cross-reference
interchangeable
7010037-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy N22P22024C6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N22P22024C6?
N22P22024C6 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace N22P22024C6?
There are 17 known substitutes for N22P22024C6: 15608, SK360, 16817 and 14 more. Substitute compatibility should be verified for your specific system.
Is N22P22024C6 still available?
N22P22024C6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N22P22024C6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026