PartsTable
Technical Data Sheet
Download PDF

N219985 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N219985: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, fork_depth: 0.350 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN, hole_diameter: 0.168 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, overall_width: 0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN, overall_height: 0.422 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN, fork_span_width: 0.335 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-136-4549, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N219985
NSN: 5340-01-136-4549
FSC: 5340 — Hardware, Commercial
CAGE: 98230 — NATIONAL SECURITY AGENCY (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
fork_depth0.350 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
hole_diameter0.168 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
overall_width0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
overall_height0.422 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
fork_span_width0.335 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
special_featuresBLACK EPOXY
style_designatorCLEVIS
surface_treatmentENAMEL SEMIGLOSS OVERALL
fork_arm_thickness0.120 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES SECURING PIN HOLE IN
thread_series_designatorUNF SECURING PIN HOLE
NSN5340-01-136-4549
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N219985 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.335 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.120 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
NOMINAL THREAD SIZE: 0.250 INCHES SECURING PIN HOLE IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.422 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
FORK SPAN WIDTH0.335 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.250 INCHES NOMINAL IN
FORK ARM THICKNESS0.120 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.250 INCHES SECURING PIN HOLE IN
SPECIAL FEATURESBLACK EPOXY
SURFACE TREATMENTENAMEL SEMIGLOSS OVERALL
MATERIALCOPPER ALLOY OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
0N219985-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N219985?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N219985?
N219985 is a CLEVIS,ROD END.
What parts can replace N219985?
There is 1 known substitute for N219985: 0N219985-1. Substitute compatibility should be verified for your specific system.
What is the NSN for N219985?
N219985 is cataloged in the U.S. Government catalog under NSN 5340-01-136-4549. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N219985

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.