PartsTable
Technical Data Sheet
Download PDF

N21061PC15 — PIN,GROOVED,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

N21061PC15: PIN,GROOVED,HEADED.

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.152 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, diameter: 0.524 INCHES MINIMUM AND 0.528 INCHES MAXIMUM IN, material: STEEL COMP 1010 OR STEEL COMP 1015 OVERALL, head_style: DOUBLE CHAMFER, grip_length: 1.125 INCHES NOMINAL IN, undercut_width: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-276-4154, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N21061PC15
NSN: 5315-00-276-4154
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
height0.152 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
diameter0.524 INCHES MINIMUM AND 0.528 INCHES MAXIMUM IN
materialSTEEL COMP 1010 OR STEEL COMP 1015 OVERALL
head_styleDOUBLE CHAMFER
grip_length1.125 INCHES NOMINAL IN
undercut_width0.125 INCHES NOMINAL IN
first_end_styleCHAMFERED
hardness_rating60.0 ROCKWELL C NOMINAL OVERALL
effective_length1.0620 INCHES MINIMUM AND 1.0635 INCHES MAXIMUM IN
style_designatorGROOVE
pin_head_diameter0.719 INCHES NOMINAL IN
under_head_length2.757 INCHES MINIMUM AND 2.759 INCHES MAXIMUM IN
NSN5315-00-276-4154
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N21061PC15 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.125 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.508 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 2.757 INCHES MINIMUM AND 2.759 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
•
HARDNESS RATING: 60.0 ROCKWELL C NOMINAL OVERALL
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.125 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
UNDERCUT DIAMETER0.508 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH2.757 INCHES MINIMUM AND 2.759 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
HARDNESS RATING60.0 ROCKWELL C NOMINAL OVERALL
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER0.719 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 7
N9870PC15Reference document
Same NSN cross-reference
Reference document — Secondary reference
N4871PC15Reference document
Same NSN cross-reference
Reference document — Secondary reference
N8848PC15Reference document
Same NSN cross-reference
Reference document — Secondary reference
N12848PC15Reference document
Same NSN cross-reference
Reference document — Secondary reference
NX14347PC15Reference document
Same NSN cross-reference
Reference document — Secondary reference
N6596PC15Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N21061PC15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N21061PC15?
N21061PC15 is a PIN,GROOVED,HEADED.
What parts can replace N21061PC15?
There are 7 known substitutes for N21061PC15: N9870PC15, N4871PC15, N8848PC15 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N21061PC15?
N21061PC15 is cataloged in the U.S. Government catalog under NSN 5315-00-276-4154. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N21061PC15

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.