PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N207
N207 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: PLASTIC SHEATH, tip_type: FLAT TIP, tip_width: 0.250 INCHES NOMINAL IN, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 17.00 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N207
NSN: 3110-00-155-7344
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialPLASTIC SHEATH
tip_typeFLAT TIP
tip_width0.250 INCHES NOMINAL IN
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width17.00 MILLIMETERS NOMINAL MM
overall_length5.000 INCHES NOMINAL IN
surface_finishGROUND
locating_featureNONLOCATING
style_designatorOPPOSITE OFFSET, OPPOSITE ENDS, EACH OFF SET TIPPED
overall_outside_diameter72.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-155-7344
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: N207 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCATING FEATURE: NONLOCATING
•
MATERIAL: STEEL OUTER RING
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
LOCATING FEATURENONLOCATING
MATERIALSTEEL OUTER RING
MATERIALSTEEL ROLLER
MATERIALSTEEL INNER RING
SURFACE FINISHGROUND
OVERALL WIDTH17.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
N305Interchangeable
interchangeable cross-reference
interchangeable
BU1305ZInterchangeable
interchangeable cross-reference
interchangeable
6001Interchangeable
interchangeable cross-reference
interchangeable
R330Interchangeable
interchangeable cross-reference
interchangeable
A-A-55602Interchangeable
interchangeable cross-reference
interchangeable
BU0307ZInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N207?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N207?
N207 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace N207?
There are 30 known substitutes for N207: N305, BU1305Z, 6001 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N207?
N207 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N207

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026