PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N206
N206 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL OUTER RING, tip_type: FLAT TIP, tip_width: 0.250 INCHES NOMINAL IN, bore_shape: STRAIGHT, bore_diameter: 30.00 MILLIMETERS NOMINAL MM, overall_width: 16.00 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7341, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N206
NSN: 3110-00-155-7341
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
tip_typeFLAT TIP
tip_width0.250 INCHES NOMINAL IN
bore_shapeSTRAIGHT
bore_diameter30.00 MILLIMETERS NOMINAL MM
overall_width16.00 MILLIMETERS NOMINAL MM
overall_height0.500 INCHES NOMINAL IN
overall_length5.000 INCHES NOMINAL IN
surface_finishGROUND
locating_featureNONLOCATING
style_designatorOPPOSITE OFFSET, OPPOSITE ENDS, EACH OFF SET TIPPED
width_across_flats0.188 INCHES NOMINAL IN
NSN3110-00-155-7341
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: N206 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL INNER RING
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 30.00 MILLIMETERS NOMINAL MM
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
MATERIALSTEEL ROLLER
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
SURFACE FINISHGROUND
BORE DIAMETER30.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL OUTSIDE DIAMETER62.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
OVERALL WIDTH16.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
6RS206Interchangeable
interchangeable cross-reference
interchangeable
AL773-124Interchangeable
interchangeable cross-reference
interchangeable
RS206Interchangeable
interchangeable cross-reference
interchangeable
18081Interchangeable
interchangeable cross-reference
interchangeable
756-6095Interchangeable
interchangeable cross-reference
interchangeable
136021Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N206?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N206?
N206 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace N206?
There are 24 known substitutes for N206: 6RS206, AL773-124, RS206 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N206?
N206 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N206

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026