PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N17C782016-352
N17C782016-352 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.171 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.625 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.025 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-229-7717, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N17C782016-352
NSN: 5340-00-229-7717
FSC: 5340
CAGE: 99993 — DEPARTMENT OF THE NAVY (USA)
SPECIFICATIONS
diameter0.171 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.625 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.025 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
end_item_identificationW/S:FORRESTAL CLASS CV
cushioning_environmental_protectionHEAT
material_document_and_classificationQQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.827 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.563 INCHES NOMINAL IN
NSN5340-00-229-7717
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N17C782016-352 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.171 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.171 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALALUMINUM ALLOY 2024 BAND
MATERIALRUBBER SYNTHETIC CUSHION
END ITEM IDENTIFICATIONW/S:FORRESTAL CLASS CV
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.625 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.827 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.563 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
K-5131685Upgraded Successor
successor cross-reference
successor
5171159Upgraded Successor
successor cross-reference
successor
7744063Upgraded Successor
successor cross-reference
successor
20557Interchangeable
interchangeable cross-reference
interchangeable
7423Interchangeable
interchangeable cross-reference
interchangeable
33-352Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy N17C782016-352?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N17C782016-352?
N17C782016-352 is a CLAMP,LOOP.
What parts can replace N17C782016-352?
There are 17 known substitutes for N17C782016-352: K-5131685, 5171159, 7744063 and 14 more. Substitute compatibility should be verified for your specific system.
Is N17C782016-352 still available?
N17C782016-352 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N17C782016-352

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026