PartsTable
Technical Data Sheet
Download PDF

N15311A — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

N15311A: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1212 OVERALL, nut_style: HEXAGON, nut_height: 1.125 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-350-2861, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N15311A
NSN: 5310-00-350-2861
FSC: 5310 — Nuts and Washers
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialSTEEL COMP 1212 OVERALL
nut_styleHEXAGON
nut_height1.125 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats1.250 INCHES NOMINAL IN
nominal_thread_size0.875 INCHES IN
bearing_surface_typeFLAT OR WASHER FACED
thread_quantity_per_inch14
material_document_and_classificationQQ-A-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-350-2861
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N15311A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.250 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.875 INCHES IN
•
NUT HEIGHT: 1.125 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 3B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.250 INCHES NOMINAL IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.875 INCHES IN
NUT HEIGHT1.125 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH14
MATERIALSTEEL COMP 1212 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
376202Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
A214344Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy N15311A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N15311A?
N15311A is a NUT,PLAIN,HEXAGON.
What parts can replace N15311A?
There are 2 known substitutes for N15311A: 376202, A214344. Substitute compatibility should be verified for your specific system.
What is the NSN for N15311A?
N15311A is cataloged in the U.S. Government catalog under NSN 5310-00-350-2861. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N15311A