PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N141021610
N141021610 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include center_hole_diameter: 3.222 INCHES MINIMUM AND 3.252 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-008-7092, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N141021610
NSN: 5330-00-008-7092
FSC: 5330
CAGE: A2309 — WASS SRL (ITA)
SPECIFICATIONS
center_hole_diameter3.222 INCHES MINIMUM AND 3.252 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5330-00-008-7092
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N141021610 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 3.222 INCHES MINIMUM AND 3.252 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER3.222 INCHES MINIMUM AND 3.252 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
580-204-1416793PC25Interchangeable
interchangeable cross-reference
interchangeable
580-204-1416793PInterchangeable
interchangeable cross-reference
interchangeable
6803PC25Interchangeable
interchangeable cross-reference
interchangeable
2-152C557-7Interchangeable
Same NIIN cross-reference
interchangeable
432043-12Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N141021610?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N141021610?
N141021610 is a PACKING,PREFORMED.
What parts can replace N141021610?
There are 5 known substitutes for N141021610: 580-204-1416793PC25, 580-204-1416793P, 6803PC25 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N141021610?
N141021610 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-008-7092. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N141021610

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026