PartsTable
Technical Data Sheet
Download PDF

N14005-43 — NUT,TUBE COUPLING

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

N14005-43: NUT,TUBE COUPLING.

The NUT,TUBE COUPLING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: TUBE COUPLING, nut_height: 0.570 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-364-1525, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N14005-43
NSN: 4730-01-364-1525
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleTUBE COUPLING
nut_height0.570 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
thread_directionRIGHT-HAND
fabrication_methodMACHINED
width_across_flats1.110 INCHES NOMINAL IN
nominal_thread_size0.875 INCHES IN
smallest_inside_diameter0.700 INCHES NOMINAL IN
thread_quantity_per_inch18
nominal_tube_outside_diameter0.500 INCHES IN
NSN4730-01-364-1525
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: N14005-43 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.110 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.875 INCHES IN
•
NUT HEIGHT: 0.570 INCHES NOMINAL IN
•
NUT STYLE: TUBE COUPLING
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 18
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.110 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.875 INCHES IN
NUT HEIGHT0.570 INCHES NOMINAL IN
NUT STYLETUBE COUPLING
THREAD CLASS2B
THREAD QUANTITY PER INCH18
MATERIALSTEEL CORROSION RESISTING OVERALL
FABRICATION METHODMACHINED
SUBSTITUTES & CROSS-REFERENCES 2
7D0059V08Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7D0059Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N14005-43?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N14005-43?
N14005-43 is a NUT,TUBE COUPLING.
What parts can replace N14005-43?
There are 2 known substitutes for N14005-43: 7D0059V08, 7D0059. Substitute compatibility should be verified for your specific system.
What is the NSN for N14005-43?
N14005-43 is cataloged in the U.S. Government catalog under NSN 4730-01-364-1525. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N14005-43