PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N13102
N13102 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The BLADE,WINDSHIELD WIPER is a the manufacturer industrial component. Key specifications include seat_angle: 30.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT SINGLE RESPONSE DEGF, overall_length: 20.000 INCHES NOMINAL IN, connection_type: THREADED EXTERNAL PIPE FIRST END, inside_diameter: 0.375 INCHES NOMINAL IN, mounting_method: CLIP OR SADDLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-797-9291, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N13102
NSN: 4720-00-797-9291
FSC: 4720
CAGE: 06721 — HALDEX BRAKE PRODUCTS CORPORATION (USA)
SPECIFICATIONS
seat_angle30.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT SINGLE RESPONSE DEGF
overall_length20.000 INCHES NOMINAL IN
connection_typeTHREADED EXTERNAL PIPE FIRST END
inside_diameter0.375 INCHES NOMINAL IN
mounting_methodCLIP OR SADDLE
connection_styleINVERTED FLARE FIRST END
outside_diameter0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
wiper_arm_adapterNOT INCLUDED
burst_test_pressure900.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.250 INCHES FIRST END IN
NSN4720-00-797-9291
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: N13102 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND MILDEW RESISTANT AND OZONE RESISTANT AND COLD RESISTANT AND FUEL RESISTANT
•
INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
NOMINAL THREAD SIZE: 0.250 INCHES FIRST END IN
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
BURST TEST PRESSURE: 900.0 POUNDS PER SQUARE INCH LBS
•
MEASURING METHOD AND LENGTH: 48.000 INCHES NOMINAL OVERALL IN
•
END CONNECTION DESIGN: STRAIGHT FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND MILDEW RESISTANT AND OZONE RESISTANT AND COLD RESISTANT AND FUEL RESISTANT
INSIDE DIAMETER0.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEROUND
NOMINAL THREAD SIZE0.250 INCHES FIRST END IN
THREAD DIRECTIONRIGHT-HAND FIRST END
BURST TEST PRESSURE900.0 POUNDS PER SQUARE INCH LBS
MEASURING METHOD AND LENGTH48.000 INCHES NOMINAL OVERALL IN
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED COTTON CORD AND OUTER LAYER RUBBER IMPREGNATED BRAIDED RAYON CORD
INSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
AT117254Interchangeable
interchangeable cross-reference
interchangeable
64-201Interchangeable
interchangeable cross-reference
interchangeable
57-10Interchangeable
interchangeable cross-reference
interchangeable
32X3006Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N13102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N13102?
N13102 is a BLADE,WINDSHIELD WIPER.
What parts can replace N13102?
There are 4 known substitutes for N13102: AT117254, 64-201, 57-10 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N13102?
N13102 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-797-9291. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N13102

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026