PartsTable
Technical Data Sheet
Download PDF

N12855 — SEAT,HELICAL COMPRESSION SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N12855: SEAT,HELICAL COMPRESSION SPRING.

SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: COPPER ALLOY, end_diameter: 0.9690 INCHES NOMINAL IN, overall_height: 0.6880 INCHES NOMINAL IN, special_features: 0.969 IN.DIA END CHMAFERED 1/8 IN.45 DEG,1.875 IN.DIA END COUNTERBORED ON CENTER 0.375 IN.DIA 0.438 IN.DEEP IN, style_designator: SEAT, first_step_diameter: 1.8750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-036-1555, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N12855
NSN: 5340-00-036-1555
FSC: 5340 — Hardware, Commercial
CAGE: 35795 — LESLIE CONTROLS, INC. DBA LESLIE CONTROLS INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY
end_diameter0.9690 INCHES NOMINAL IN
overall_height0.6880 INCHES NOMINAL IN
special_features0.969 IN.DIA END CHMAFERED 1/8 IN.45 DEG,1.875 IN.DIA END COUNTERBORED ON CENTER 0.375 IN.DIA 0.438 IN.DEEP IN
style_designatorSEAT
first_step_diameter1.8750 INCHES NOMINAL IN
distance_from_end_to_first_step0.5000 INCHES NOMINAL IN
NSN5340-00-036-1555
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N12855 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 1.8750 INCHES NOMINAL IN
•
END DIAMETER: 0.9690 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST STEP: 0.5000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SEAT
•
MATERIAL: COPPER ALLOY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.6880 INCHES NOMINAL IN
FIRST STEP DIAMETER1.8750 INCHES NOMINAL IN
END DIAMETER0.9690 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST STEP0.5000 INCHES NOMINAL IN
STYLE DESIGNATORSEAT
SPECIAL FEATURES0.969 IN.DIA END CHMAFERED 1/8 IN.45 DEG,1.875 IN.DIA END COUNTERBORED ON CENTER 0.375 IN.DIA 0.438 IN.DEEP IN
MATERIALCOPPER ALLOY
SUBSTITUTES & CROSS-REFERENCES 1
12855Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N12855?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N12855?
N12855 is a SEAT,HELICAL COMPRESSION SPRING.
What parts can replace N12855?
There is 1 known substitute for N12855: 12855. Substitute compatibility should be verified for your specific system.
What is the NSN for N12855?
N12855 is cataloged in the U.S. Government catalog under NSN 5340-00-036-1555. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N12855