PartsTable
Technical Data Sheet
N124 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, body_style: STRAIGHT SHAPE, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, shell_type: SOLID, overall_width: 0.610 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-290-1531, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N124
NSN: 5330-00-290-1531
FSC: 5330
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
body_styleSTRAIGHT SHAPE
case_styleSQUARE
seal_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
shell_typeSOLID
overall_width0.610 INCHES MAXIMUM IN
terminal_typeTAB, SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING
overall_height0.700 INCHES NOMINAL IN
overall_length2.195 INCHES NOMINAL IN
shell_materialSTEEL
insert_materialPLASTIC DIALLYL PHTHALATE SINGLE MATING END
contact_materialCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
NSN5330-00-290-1531
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N124 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ACCOMMODATED SHAFT DIAMETER: 1.688 INCHES NOMINAL IN
CASE STYLE: SQUARE
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MATERIAL: STEEL CASE
HOUSING BORE DIAMETER: 2.502 INCHES NOMINAL IN
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.688 INCHES NOMINAL IN
CASE STYLESQUARE
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MATERIALSTEEL CASE
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER2.502 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
60603Interchangeable
interchangeable cross-reference
interchangeable
6 OUNCE CARTRIDGE-2216 B/AInterchangeable
interchangeable cross-reference
interchangeable
2216 B/AInterchangeable
interchangeable cross-reference
interchangeable
EC2216 B/AInterchangeable
interchangeable cross-reference
interchangeable
53C14700Interchangeable
interchangeable cross-reference
interchangeable
78G66Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy N124?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N124?
N124 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace N124?
There are 26 known substitutes for N124: 60603, 6 OUNCE CARTRIDGE-2216 B/A, 2216 B/A and 23 more. Substitute compatibility should be verified for your specific system.
Is N124 still available?
N124 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N124