PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N12262APC146
N12262APC146 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 1.000 INCHES NOMINAL IN, housing_bore_diameter: 29.000 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 27.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-6210, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N12262APC146
NSN: 5330-00-154-6210
FSC: 5330
CAGE: 3X894 — CONTROL FLOW, INC. DBA CONTROL FLOW INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width1.000 INCHES NOMINAL IN
housing_bore_diameter29.000 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter27.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-6210
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N12262APC146 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CASE
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 1.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 29.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 27.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CASE
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH1.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER29.000 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER27.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
09-55032Interchangeable
interchangeable cross-reference
interchangeable
312514Interchangeable
interchangeable cross-reference
interchangeable
3781Interchangeable
interchangeable cross-reference
interchangeable
BM20287A025Interchangeable
interchangeable cross-reference
interchangeable
3781-14Interchangeable
interchangeable cross-reference
interchangeable
FA9660Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N12262APC146?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N12262APC146?
N12262APC146 is a SEAL,PLAIN ENCASED.
What parts can replace N12262APC146?
There are 20 known substitutes for N12262APC146: 09-55032, 312514, 3781 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N12262APC146?
N12262APC146 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-6210. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N12262APC146

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026