PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N118-141
N118-141 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOOK AND EYE,DOOR is a the manufacturer industrial component. Key specifications include length: 3.000 INCHES NOMINAL HOOK IN, material: COPPER ALLOY HOOK, stock_shape: ROUND, fastener_type: EYE SCREW IN LOOP END, nondefinitive_spec/std_data: 1601 TYPE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-190-5146, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N118-141
NSN: 5340-00-190-5146
FSC: 5340
CAGE: 82851 — NATIONAL MFG CO DBA NATIONAL MFG SALES CO (USA)
SPECIFICATIONS
length3.000 INCHES NOMINAL HOOK IN
materialCOPPER ALLOY HOOK
stock_shapeROUND
fastener_typeEYE SCREW IN LOOP END
nondefinitive_spec/std_data1601 TYPE
NSN5340-00-190-5146
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N118-141 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER TYPE: EYE SCREW IN LOOP END
•
STOCK SHAPE: ROUND
•
NONDEFINITIVE SPEC/STD DATA: 1601 TYPE
•
MATERIAL: COPPER ALLOY HOOK
•
LENGTH: 3.000 INCHES NOMINAL HOOK IN
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER TYPEEYE SCREW IN LOOP END
STOCK SHAPEROUND
NONDEFINITIVE SPEC/STD DATA1601 TYPE
MATERIALCOPPER ALLOY HOOK
LENGTH3.000 INCHES NOMINAL HOOK IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
160-2027-01-01-00Interchangeable
interchangeable cross-reference
interchangeable
256043P1Interchangeable
interchangeable cross-reference
interchangeable
X2027AInterchangeable
interchangeable cross-reference
interchangeable
GGG-C-313Interchangeable
interchangeable cross-reference
interchangeable
22704Interchangeable
interchangeable cross-reference
interchangeable
53116Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N118-141?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N118-141?
N118-141 is a HOOK AND EYE,DOOR.
What parts can replace N118-141?
There are 17 known substitutes for N118-141: 160-2027-01-01-00, 256043P1, X2027A and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N118-141?
N118-141 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-190-5146. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N118-141

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026