PartsTable
Technical Data Sheet
Download PDF

N10565 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N10565: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: STEEL COMP 1010 BAND, overall_width: 0.750 INCHES NOMINAL IN, special_features: 13/32 IN. RADIUS ON TONGUE ENDS IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-350-3094, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N10565
NSN: 5340-00-350-3094
FSC: 5340 — Hardware, Commercial
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
diameter0.406 INCHES NOMINAL IN
materialSTEEL COMP 1010 BAND
overall_width0.750 INCHES NOMINAL IN
special_features13/32 IN. RADIUS ON TONGUE ENDS IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.037 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
material_document_and_classificationQQ-S-633,AMEND 2 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.063 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.688 INCHES NOMINAL IN
NSN5340-00-350-3094
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N10565 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,AMEND 2 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.406 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.037 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.063 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,AMEND 2 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.406 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.037 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.063 INCHES NOMINAL IN
SPECIAL FEATURES13/32 IN. RADIUS ON TONGUE ENDS IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.688 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 BAND
SUBSTITUTES & CROSS-REFERENCES 1
383528Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy N10565?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N10565?
N10565 is a CLAMP,LOOP.
What parts can replace N10565?
There is 1 known substitute for N10565: 383528. Substitute compatibility should be verified for your specific system.
What is the NSN for N10565?
N10565 is cataloged in the U.S. Government catalog under NSN 5340-00-350-3094. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N10565