PartsTable
Technical Data Sheet
Download PDF

N100-2ITEM20 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N100-2ITEM20: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 9.375 INCHES NOMINAL IN, bolt_circle_diameter: 8.250 INCHES NOMINAL IN, cross-sectional_thickness: 0.015 INCHES NOMINAL IN, cross-sectional_shape_style: RECTANGULAR METAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-393-4853, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N100-2ITEM20
NSN: 5330-00-393-4853
FSC: 5330 — Packing and Gasket Materials
CAGE: 10855 — CARRIER CORP (USA)
SPECIFICATIONS
hole_diameter0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter9.375 INCHES NOMINAL IN
bolt_circle_diameter8.250 INCHES NOMINAL IN
cross-sectional_thickness0.015 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR METAL
NSN5330-00-393-4853
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N100-2ITEM20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.015 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
OUTSIDE DIAMETER: 9.375 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 8.250 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.015 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
OUTSIDE DIAMETER9.375 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER8.250 INCHES NOMINAL IN
HOLE DIAMETER0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
7G5-1192Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
N1000-6PC3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N100-2ITEM20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N100-2ITEM20?
N100-2ITEM20 is a GASKET.
What parts can replace N100-2ITEM20?
There are 2 known substitutes for N100-2ITEM20: 7G5-1192, N1000-6PC3. Substitute compatibility should be verified for your specific system.
What is the NSN for N100-2ITEM20?
N100-2ITEM20 is cataloged in the U.S. Government catalog under NSN 5330-00-393-4853. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N100-2ITEM20