PartsTable
Technical Data Sheet
PartsTable / O-RING / N0756 3-910
N0756 3-910 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 0.746 INCHES MINIMUM AND 0.764 INCHES MAXIMUM IN, cross-sectional_height: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, end_item_identification: U-2. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-349-6182, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N0756 3-910
NSN: 5331-01-349-6182
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter0.746 INCHES MINIMUM AND 0.764 INCHES MAXIMUM IN
cross-sectional_height0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
end_item_identificationU-2
NSN5331-01-349-6182
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N0756 3-910 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 0.746 INCHES MINIMUM AND 0.764 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONU-2
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER0.746 INCHES MINIMUM AND 0.764 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
5331PL0813732Interchangeable
interchangeable cross-reference
interchangeable
M83461/2-902Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-83461Interchangeable
interchangeable cross-reference
interchangeable
AS568-906 MIL-P-83461Interchangeable
interchangeable cross-reference
interchangeable
3-906N168-80Interchangeable
interchangeable cross-reference
interchangeable
PL-999D0838 PC NO 19Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy N0756 3-910?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N0756 3-910?
N0756 3-910 is a O-RING.
What parts can replace N0756 3-910?
There are 32 known substitutes for N0756 3-910: 5331PL0813732, M83461/2-902, MIL-P-83461 and 29 more. Substitute compatibility should be verified for your specific system.
Is N0756 3-910 still available?
N0756 3-910 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N0756 3-910

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026