PartsTable
Technical Data Sheet
Download PDF

N0552 2-106 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N0552 2-106: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.169 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, end_item_identification: 2350-01-432-1526;ARMORED RECON AIRBORNE MODEL XM7,BRADLEY. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-498-2275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N0552 2-106
NSN: 5331-01-498-2275
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating90.0 SHORE DUROMETER A NOMINAL
center_hole_diameter0.169 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identification2350-01-432-1526;ARMORED RECON AIRBORNE MODEL XM7,BRADLEY
NSN5331-01-498-2275
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N0552 2-106 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.169 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.169 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN
END ITEM IDENTIFICATION2350-01-432-1526;ARMORED RECON AIRBORNE MODEL XM7,BRADLEY
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 3
2-106N0552-90Reference document
Same NSN cross-reference
Reference document — Secondary reference
490-46Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
490-46-106-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N0552 2-106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N0552 2-106?
N0552 2-106 is a O-RING.
What parts can replace N0552 2-106?
There are 3 known substitutes for N0552 2-106: 2-106N0552-90, 490-46, 490-46-106-1. Substitute compatibility should be verified for your specific system.
What is the NSN for N0552 2-106?
N0552 2-106 is cataloged in the U.S. Government catalog under NSN 5331-01-498-2275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N0552 2-106