PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N05111316V
N05111316V ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,VENT is a the manufacturer industrial component. Key specifications include vent_hole_shape: SQUARE, outside_diameter: 0.190 INCHES NOMINAL IN, special_features: MATERIAL IS NON-FLAMERETARDANT POLYPROPYLENE, end_connection_type: UNTHREADED, unthreaded_end_length: 0.200 INCHES NOMINAL IN, end_item_identification: BATTERY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-561-6101, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N05111316V
NSN: 5340-01-561-6101
FSC: 5340
CAGE: 88219 — STRYTEN ENERGY LLC (USA)
SPECIFICATIONS
vent_hole_shapeSQUARE
outside_diameter0.190 INCHES NOMINAL IN
special_featuresMATERIAL IS NON-FLAMERETARDANT POLYPROPYLENE
vent_hole_quantity2
end_connection_typeUNTHREADED
unthreaded_end_length0.200 INCHES NOMINAL IN
end_item_identificationBATTERY
square_vent_hole_length0.250 INCHES NOMINAL IN
material_document_and_classification417 MFR REF SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agency(INAVY)COVER, VENT ABS IIP
NSN5340-01-561-6101
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N05111316V MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
VENT HOLE QUANTITY: 2
•
END CONNECTION TYPE: UNTHREADED
•
VENT HOLE SHAPE: SQUARE
•
UNTHREADED END LENGTH: 0.200 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.190 INCHES NOMINAL IN
•
SQUARE VENT HOLE LENGTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESMATERIAL IS NON-FLAMERETARDANT POLYPROPYLENE
VENT HOLE QUANTITY2
END CONNECTION TYPEUNTHREADED
VENT HOLE SHAPESQUARE
UNTHREADED END LENGTH0.200 INCHES NOMINAL IN
OUTSIDE DIAMETER0.190 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCY(INAVY)COVER, VENT ABS IIP
SQUARE VENT HOLE LENGTH0.250 INCHES NOMINAL IN
END ITEM IDENTIFICATIONBATTERY
MATERIAL DOCUMENT AND CLASSIFICATION417 MFR REF SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
4730002534413Interchangeable
interchangeable cross-reference
interchangeable
111316Interchangeable
interchangeable cross-reference
interchangeable
457A83Interchangeable
interchangeable cross-reference
interchangeable
AF-807(2)Interchangeable
interchangeable cross-reference
interchangeable
A133CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N05111316V?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N05111316V?
N05111316V is a PLUG,VENT.
What parts can replace N05111316V?
There are 5 known substitutes for N05111316V: 4730002534413, 111316, 457A83 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N05111316V?
N05111316V is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-561-6101. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N05111316V

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026