PartsTable
Technical Data Sheet
Download PDF

N03S — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

N03S: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.057 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-021-8552, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N03S
NSN: 5310-00-021-8552
FSC: 5310 — Nuts and Washers
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.057 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.1800 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
nominal_thread_size0.099 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch56
nondefinitive_spec/std_dataC GROUP AND 2 TYPE AND 1 STYLE AND A GRADE
NSN5310-00-021-8552
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N03S · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.1800 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.099 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: C GROUP AND 2 TYPE AND 1 STYLE AND A GRADE
•
NUT HEIGHT: 0.057 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.1800 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.099 INCHES IN
NONDEFINITIVE SPEC/STD DATAC GROUP AND 2 TYPE AND 1 STYLE AND A GRADE
NUT HEIGHT0.057 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH56
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
218552Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FFN836GPCTYPE2STYLE1GRADEAReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N03S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N03S?
N03S is a NUT,PLAIN,HEXAGON.
What parts can replace N03S?
There are 2 known substitutes for N03S: 218552, FFN836GPCTYPE2STYLE1GRADEA. Substitute compatibility should be verified for your specific system.
What is the NSN for N03S?
N03S is cataloged in the U.S. Government catalog under NSN 5310-00-021-8552. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N03S