PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N0304 2-115
N0304 2-115 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL OVERALL, center_hole_diameter: 0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, cross-sectional_shape_style: O-RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-181-0024, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N0304 2-115
NSN: 5330-00-181-0024
FSC: 5330
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating70.0 SHORE DUROMETER A NOMINAL OVERALL
center_hole_diameter0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
NSN5330-00-181-0024
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N0304 2-115 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
MS28775-115Interchangeable
interchangeable cross-reference
interchangeable
5530-115Interchangeable
interchangeable cross-reference
interchangeable
B-6227-13Interchangeable
interchangeable cross-reference
interchangeable
CUJ-1-25-8Interchangeable
interchangeable cross-reference
interchangeable
2-115N304-7Interchangeable
interchangeable cross-reference
interchangeable
SP132-13Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N0304 2-115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N0304 2-115?
N0304 2-115 is a PACKING,PREFORMED.
What parts can replace N0304 2-115?
There are 18 known substitutes for N0304 2-115: MS28775-115, 5530-115, B-6227-13 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N0304 2-115?
N0304 2-115 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-181-0024. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N0304 2-115

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026