PartsTable
Technical Data Sheet
Download PDF

N0300 8-007 — RING,WIPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N0300 8-007: RING,WIPER.

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 0.171 INCHES NOMINAL IN, outside_diameter: 0.277 INCHES NOMINAL IN, material_thickness: 0.049 INCHES NOMINAL IN, outer_edge_thickness: 0.049 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-007-2327, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N0300 8-007
NSN: 5330-00-007-2327
FSC: 5330 — Packing and Gasket Materials
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter0.171 INCHES NOMINAL IN
outside_diameter0.277 INCHES NOMINAL IN
material_thickness0.049 INCHES NOMINAL IN
outer_edge_thickness0.049 INCHES NOMINAL IN
NSN5330-00-007-2327
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N0300 8-007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER EDGE THICKNESS: 0.049 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.277 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.049 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.171 INCHES NOMINAL IN
•
RING STYLE: CONCENTRIC
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
OUTER EDGE THICKNESS0.049 INCHES NOMINAL IN
OUTSIDE DIAMETER0.277 INCHES NOMINAL IN
MATERIAL THICKNESS0.049 INCHES NOMINAL IN
INSIDE DIAMETER0.171 INCHES NOMINAL IN
RING STYLECONCENTRIC
MATERIALUNABLE TO DECODE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
8-007N300-90Reference document
Same NSN cross-reference
Reference document — Secondary reference
8-0075N517-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N0300 8-007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N0300 8-007?
N0300 8-007 is a RING,WIPER.
What parts can replace N0300 8-007?
There are 2 known substitutes for N0300 8-007: 8-007N300-90, 8-0075N517-9. Substitute compatibility should be verified for your specific system.
What is the NSN for N0300 8-007?
N0300 8-007 is cataloged in the U.S. Government catalog under NSN 5330-00-007-2327. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N0300 8-007