PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N02STD
N02STD ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SEALING ELEMENT A, seal_width: 0.313 INCHES NOMINAL IN, surface_treatment: RUBBER CASE, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 3.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-923-0880, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N02STD
NSN: 5330-00-923-0880
FSC: 5330
CAGE: 65456 — WOODS T B INC (USA)
SPECIFICATIONS
materialRUBBER SEALING ELEMENT A
seal_width0.313 INCHES NOMINAL IN
surface_treatmentRUBBER CASE
sealing_element_styleVERTICAL
accommodated_shaft_diameter3.000 INCHES NOMINAL IN
NSN5330-00-923-0880
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N02STD MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.313 INCHES NOMINAL IN
•
SURFACE TREATMENT: RUBBER CASE
•
ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER SEALING ELEMENT A
•
SEALING ELEMENT STYLE: VERTICAL
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.313 INCHES NOMINAL IN
SURFACE TREATMENTRUBBER CASE
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
MATERIALRUBBER SEALING ELEMENT A
SEALING ELEMENT STYLEVERTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
6525803Interchangeable
interchangeable cross-reference
interchangeable
V130LA10AInterchangeable
interchangeable cross-reference
interchangeable
QH02Interchangeable
interchangeable cross-reference
interchangeable
TV-1Interchangeable
interchangeable cross-reference
interchangeable
G5-7-2Interchangeable
interchangeable cross-reference
interchangeable
N02STDSEALInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N02STD?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N02STD?
N02STD is a SEAL,PLAIN ENCASED.
What parts can replace N02STD?
There are 6 known substitutes for N02STD: 6525803, V130LA10A, QH02 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N02STD?
N02STD is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-923-0880. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N02STD

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026