PartsTable
Technical Data Sheet
Download PDF

N0299 2-342 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N0299 2-342: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: 225.0 FAHRENHEIT DEGF, special_features: <70, 50 DUROMETER, center_hole_diameter: 3.6 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: O-RING. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-695-5276, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N0299 2-342
NSN: 5331-01-695-5276
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating225.0 FAHRENHEIT DEGF
special_features<70, 50 DUROMETER
center_hole_diameter3.6 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyO-RING
NSN5331-01-695-5276
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N0299 2-342 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 225.0 FAHRENHEIT DEGF
•
COLOR: BLACK
•
CENTER HOLE DIAMETER: 3.6 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING225.0 FAHRENHEIT DEGF
COLORBLACK
SPECIAL FEATURES<70, 50 DUROMETER
CENTER HOLE DIAMETER3.6 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYO-RING
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 2
69.MD000-1687Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
941664Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N0299 2-342?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N0299 2-342?
N0299 2-342 is a O-RING.
What parts can replace N0299 2-342?
There are 2 known substitutes for N0299 2-342: 69.MD000-1687, 941664. Substitute compatibility should be verified for your specific system.
What is the NSN for N0299 2-342?
N0299 2-342 is cataloged in the U.S. Government catalog under NSN 5331-01-695-5276. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N0299 2-342