PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N0 26
N0 26 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 6.000 INCHES NOMINAL IN, first_hole_diameter: 0.281 INCHES NOMINAL IN, pin_overall_diameter: 1.2500 INCHES NOMINAL IN, second_hole_diameter: 0.281 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-275-4764, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N0 26
NSN: 5315-00-275-4764
FSC: 5315
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length6.000 INCHES NOMINAL IN
first_hole_diameter0.281 INCHES NOMINAL IN
pin_overall_diameter1.2500 INCHES NOMINAL IN
second_hole_diameter0.281 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.016 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes5.219 INCHES NOMINAL IN
distance_from_centerline_of_hole_to_end_of_pin0.391 INCHES NOMINAL IN
NSN5315-00-275-4764
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N0 26 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST HOLE DIAMETER: 0.281 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 6.000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 5.219 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST HOLE DIAMETER0.281 INCHES NOMINAL IN
PIN OVERALL LENGTH6.000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE ARRANGEMENT STYLEBOTH END DRILLED
CENTER TO CENTER DISTANCE BETWEEN HOLES5.219 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SECOND HOLE DIAMETER0.281 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
2638Interchangeable
interchangeable cross-reference
interchangeable
3373654Interchangeable
interchangeable cross-reference
interchangeable
GGG-W-636Interchangeable
interchangeable cross-reference
interchangeable
AN3053-8Interchangeable
interchangeable cross-reference
interchangeable
AN3053Interchangeable
interchangeable cross-reference
interchangeable
019-2034-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N0 26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N0 26?
N0 26 is a PIN,STRAIGHT,HEADLESS.
What parts can replace N0 26?
There are 15 known substitutes for N0 26: 2638, 3373654, GGG-W-636 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N0 26?
N0 26 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-275-4764. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N0 26

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026