PartsTable
Technical Data Sheet
PartsTable / O-RING / N-999-7082-A-003
N-999-7082-A-003 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The IMPELLER,PUMP,CENTRIFUGAL is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 0.495 INCHES NOMINAL IN, overall_diameter: 5.500 INCHES NOMINAL IN, center_hole_diameter: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-068-9528, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N-999-7082-A-003
NSN: 5331-00-068-9528
FSC: 5331 — O-RING
CAGE: 10941 — CARVER PUMP COMPANY (USA)
SPECIFICATIONS
materialCOPPER ALLOY
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter0.495 INCHES NOMINAL IN
overall_diameter5.500 INCHES NOMINAL IN
center_hole_diameter0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.072 INCHES NOMINAL IN
end_item_identificationPUMP,CENTRIFUGAL,CARVER PUMP CO,MODEL 2-D-2
NSN5331-00-068-9528
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N-999-7082-A-003 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.072 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.495 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
ELONGATION PERCENTAGE: 160 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.072 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.495 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
ELONGATION PERCENTAGE160 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
5331PL2007478Interchangeable
interchangeable cross-reference
interchangeable
M83248-1-904Interchangeable
interchangeable cross-reference
interchangeable
379643Interchangeable
interchangeable cross-reference
interchangeable
12707Interchangeable
interchangeable cross-reference
interchangeable
9034Interchangeable
interchangeable cross-reference
interchangeable
90342Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy N-999-7082-A-003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N-999-7082-A-003?
N-999-7082-A-003 is a IMPELLER,PUMP,CENTRIFUGAL.
What parts can replace N-999-7082-A-003?
There are 28 known substitutes for N-999-7082-A-003: 5331PL2007478, M83248-1-904, 379643 and 25 more. Substitute compatibility should be verified for your specific system.
Is N-999-7082-A-003 still available?
N-999-7082-A-003 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N-999-7082-A-003

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026