PartsTable
Technical Data Sheet
Download PDF

N-903 DWG PC 12 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

N-903 DWG PC 12: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 631 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, inside_diameter: 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN, style_designator: CYLINDRICAL, spring_free_length: 1.539 INCHES NOMINAL IN, coil_helix_direction: RIGHT-HAND OR LEFT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5360-01-118-5425, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N-903 DWG PC 12
NSN: 5360-01-118-5425
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 26505 — GROVE VALVE OPERATIONS (USA)
SPECIFICATIONS
materialSTEEL COMP 631 OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
inside_diameter0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
style_designatorCYLINDRICAL
spring_free_length1.539 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_free_outside_diameter0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
material_document_and_classificationMIL-W-46078,CLASS 17-7PH MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5360-01-118-5425
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SPRING,HELICAL,COMPRESSION TITLE COMPONENT PN N-903 DWG PC 12 MFR SPRING,HELICAL,COMPRES
KEY FEATURES
•
SPRING FREE OUTSIDE DIAMETER: 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
•
END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS
•
STYLE DESIGNATOR: CYLINDRICAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-46078,CLASS 17-7PH MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SPRING FREE LENGTH: 1.539 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
•
COIL HELIX DIRECTION: RIGHT-HAND OR LEFT-HAND
•
MATERIAL: STEEL COMP 631 OVERALL
TECHNICAL CHARACTERISTICS
SPRING FREE OUTSIDE DIAMETER0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
END STYLESPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATORCYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-W-46078,CLASS 17-7PH MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH1.539 INCHES NOMINAL IN
INSIDE DIAMETER0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
COIL HELIX DIRECTIONRIGHT-HAND OR LEFT-HAND
MATERIALSTEEL COMP 631 OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
015-51401Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N-903 DWG PC 12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N-903 DWG PC 12?
N-903 DWG PC 12 is a SPRING,HELICAL,COMPRESSION.
What parts can replace N-903 DWG PC 12?
There is 1 known substitute for N-903 DWG PC 12: 015-51401. Substitute compatibility should be verified for your specific system.
What is the NSN for N-903 DWG PC 12?
N-903 DWG PC 12 is cataloged in the U.S. Government catalog under NSN 5360-01-118-5425. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N-903 DWG PC 12