PartsTable
Technical Data Sheet
Download PDF

N-310-L — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

N-310-L: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 1.9680 INCHES MINIMUM AND 1.9685 INCHES MAXIMUM IN, overall_width: 0.9005 INCHES MINIMUM AND 0.9055 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-104-7545, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N-310-L
NSN: 3110-00-104-7545
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter1.9680 INCHES MINIMUM AND 1.9685 INCHES MAXIMUM IN
overall_width0.9005 INCHES MINIMUM AND 0.9055 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
special_featuresSNAP RING AND GROOVE IN OUTER RING
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter4.3301 INCHES MINIMUM AND 4.3307 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-104-7545
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: N-310-L · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 4.3301 INCHES MINIMUM AND 4.3307 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.9005 INCHES MINIMUM AND 0.9055 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER4.3301 INCHES MINIMUM AND 4.3307 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESSNAP RING AND GROOVE IN OUTER RING
BORE DIAMETER1.9680 INCHES MINIMUM AND 1.9685 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
228806Reference document
Same NSN cross-reference
Reference document — Secondary reference
8992-ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy N-310-L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N-310-L?
N-310-L is a BEARING,BALL,ANNULAR.
What parts can replace N-310-L?
There are 2 known substitutes for N-310-L: 228806, 8992-A. Substitute compatibility should be verified for your specific system.
What is the NSN for N-310-L?
N-310-L is cataloged in the U.S. Government catalog under NSN 3110-00-104-7545. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N-310-L