PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N-117080-A
N-117080-A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: GLASS OVERALL, hole_diameter: 0.257 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 6.312 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 5.875 INCHES NOMINAL IN, bolt_circle_diameter: 7.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-359-9353, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N-117080-A
NSN: 5330-00-359-9353
FSC: 5330
CAGE: 79466 — AESYS TECHNOLOGIES, L.L.C. DBA JACKSON & CHURCH HVAC GLOBAL DIV YORK SHIPLEY GLOBAL (USA)
SPECIFICATIONS
materialGLASS OVERALL
hole_diameter0.257 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter6.312 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter5.875 INCHES NOMINAL IN
bolt_hole_quantity6
bolt_circle_diameter7.125 INCHES NOMINAL IN
fsc_application_dataLAUNDRY UNIT,TRAILER MOUNTED
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-359-9353
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N-117080-A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: GLASS OVERALL
•
BOLT CIRCLE DIAMETER: 7.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 6.312 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 6
•
HOLE DIAMETER: 0.257 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
FSC APPLICATION DATA: LAUNDRY UNIT,TRAILER MOUNTED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALGLASS OVERALL
BOLT CIRCLE DIAMETER7.125 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER6.312 INCHES NOMINAL IN
BOLT HOLE QUANTITY6
HOLE DIAMETER0.257 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
FSC APPLICATION DATALAUNDRY UNIT,TRAILER MOUNTED
APERTURE DIAMETER5.875 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
37165Interchangeable
interchangeable cross-reference
interchangeable
1172-762Interchangeable
interchangeable cross-reference
interchangeable
H-73602Interchangeable
interchangeable cross-reference
interchangeable
3542Interchangeable
interchangeable cross-reference
interchangeable
MIL-T-62145Interchangeable
interchangeable cross-reference
interchangeable
3542-81Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N-117080-A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N-117080-A?
N-117080-A is a GASKET.
What parts can replace N-117080-A?
There are 19 known substitutes for N-117080-A: 37165, 1172-762, H-73602 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N-117080-A?
N-117080-A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-359-9353. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N-117080-A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026