MZ3H-58-Q10 — GEAR,ANTIBACKLASH,SPUR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MZ3H-58-Q10: GEAR,ANTIBACKLASH,SPUR.

The GEAR,ANTIBACKLASH,SPUR is a the manufacturer industrial component. Key specifications include tooth_form: STANDARD, pitch_diameter: 0.6032 INCHES MINIMUM AND 0.6042 INCHES MAXIMUM IN, pressure_angle: 20.0000 DEGREES, teeth_quantity: 58, style_designator: PROTRUDING HUB, face_nominal_width: 0.104 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-052-7060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MZ3H-58-Q10

NSN: 3020-01-052-7060
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 00328 — DESIGNATRONICS INCORPORATED DIV STERLING INSTRUMENTS DIV (USA)

SPECIFICATIONS

tooth_form	STANDARD
pitch_diameter	0.6032 INCHES MINIMUM AND 0.6042 INCHES MAXIMUM IN
pressure_angle	20.0000 DEGREES
teeth_quantity	58
style_designator	PROTRUDING HUB
face_nominal_width	0.104 INCHES IN
hub_nominal_diameter	0.185 INCHES FIRST END IN
bore_nominal_diameter	0.125 INCHES BOTH ENDS IN
nominal_overall_length	0.325 INCHES IN
nominal_distance_between_body_face_and_protruding_hub_end	0.221 INCHES FIRST END IN
NSN	3020-01-052-7060

COMPONENT DIAGRAM

KEY FEATURES

•

BORE NOMINAL DIAMETER: 0.125 INCHES BOTH ENDS IN

•

HUB NOMINAL DIAMETER: 0.185 INCHES FIRST END IN

•

TEETH QUANTITY: 58

•

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.221 INCHES FIRST END IN

•

NOMINAL OVERALL LENGTH: 0.325 INCHES IN

•

STYLE DESIGNATOR: PROTRUDING HUB

•

PITCH DIAMETER: 0.6032 INCHES MINIMUM AND 0.6042 INCHES MAXIMUM IN

•

TOOTH FORM: STANDARD

TECHNICAL CHARACTERISTICS

BORE NOMINAL DIAMETER	0.125 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER	0.185 INCHES FIRST END IN
TEETH QUANTITY	58
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.221 INCHES FIRST END IN
NOMINAL OVERALL LENGTH	0.325 INCHES IN
STYLE DESIGNATOR	PROTRUDING HUB
PITCH DIAMETER	0.6032 INCHES MINIMUM AND 0.6042 INCHES MAXIMUM IN
TOOTH FORM	STANDARD
PRESSURE ANGLE	20.0000 DEGREES
FACE NOMINAL WIDTH	0.104 INCHES IN

OTHER ITEMS IN FSC 3020 — Gears, Pulleys, Sprockets, and Transmission Chain

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3020-00-000-0091 3020-00-001-0027 3020-00-001-0028 3020-00-001-0063 3020-00-001-0064 3020-00-001-0066 3020-00-001-0071 3020-00-001-0072

SUBSTITUTES & CROSS-REFERENCES 1

802770-1058Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy MZ3H-58-Q10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MZ3H-58-Q10?

MZ3H-58-Q10 is a GEAR,ANTIBACKLASH,SPUR.

What parts can replace MZ3H-58-Q10?

There is 1 known substitute for MZ3H-58-Q10: 802770-1058. Substitute compatibility should be verified for your specific system.

What is the NSN for MZ3H-58-Q10?

MZ3H-58-Q10 is cataloged in the U.S. Government catalog under NSN 3020-01-052-7060. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MZ3H-58-Q10 — GEAR,ANTIBACKLASH,SPUR

Request a Quote — MZ3H-58-Q10