MTW4P5 — CAPACITOR,FIXED,METALLIZED,PAPER

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

MTW4P5: CAPACITOR,FIXED,METALLIZED,PAPER.

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 1.687 INCHES NOMINAL IN, body_diameter: 0.594 INCHES NOMINAL IN, terminal_length: 1.625 INCHES MINIMUM IN, features_provided: HERMETICALLY SEALED CASE, terminal_diameter: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-00-308-6733, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ MTW4P5

NSN: 5910-00-308-6733
FSC: 5910 — Capacitors
CAGE: 14655 — CORNELL-DUBILIER ELECTRONICS (USA)

SPECIFICATIONS

body_style	W/O MTG FACILITIES, AXIAL TERMINALS
body_length	1.687 INCHES NOMINAL IN
body_diameter	0.594 INCHES NOMINAL IN
terminal_length	1.625 INCHES MINIMUM IN
features_provided	HERMETICALLY SEALED CASE
terminal_diameter	0.032 INCHES NOMINAL IN
reliability_indicator	ESTABLISHED
case_insulation_material	PLASTIC
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
specification/standard_data	81349-MIL-C-39022/1 GOVERNMENT SPECIFICATION
NSN	5910-00-308-6733

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 0.594 INCHES NOMINAL IN

•

TERMINAL DIAMETER: 0.032 INCHES NOMINAL IN

•

BODY STYLE: W/O MTG FACILITIES, AXIAL TERMINALS

•

TOLERANCE RANGE PER SECTION: -10.00 TO 10.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.625 INCHES MINIMUM IN

•

RELIABILITY FAILURE RATE LEVEL IN PERCENT: 0.1000

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

BODY DIAMETER	0.594 INCHES NOMINAL IN
TERMINAL DIAMETER	0.032 INCHES NOMINAL IN
BODY STYLE	W/O MTG FACILITIES, AXIAL TERMINALS
TOLERANCE RANGE PER SECTION	-10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.625 INCHES MINIMUM IN
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.1000
FEATURES PROVIDED	HERMETICALLY SEALED CASE
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	400.0 DC SINGLE SECTION

SUBSTITUTES & CROSS-REFERENCES 9

121P47494S4Reference document

Same NSN cross-reference

Reference document — Secondary reference

M39022/01-1717Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MQCF4-5Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

P123ZNP474M4Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

C5069-0-1AE474Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

CH09A1NE474KReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MTW4P5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MTW4P5?

MTW4P5 is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).

What parts can replace MTW4P5?

There are 9 known substitutes for MTW4P5: 121P47494S4, M39022/01-1717, MQCF4-5 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MTW4P5?

MTW4P5 is cataloged in the U.S. Government catalog under NSN 5910-00-308-6733. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MTW4P5 — CAPACITOR,FIXED,METALLIZED,PAPER

Request a Quote — MTW4P5