PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MT206PPTFG0LT
MT206PPTFG0LT ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 25.0 MILLIMETERS NOMINAL MM, overall_width: 17.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-5637, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MT206PPTFG0LT
NSN: 3110-00-554-5637
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter25.0 MILLIMETERS NOMINAL MM
overall_width17.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter62.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-554-5637
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MT206PPTFG0LT · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE DIAMETER: 25.0 MILLIMETERS NOMINAL MM
•
RETAINER FABRICATION METHOD: PRESSED
•
LOAD DIRECTION: RADIAL
•
SHIELD QUANTITY: 1
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
BORE DIAMETER25.0 MILLIMETERS NOMINAL MM
RETAINER FABRICATION METHODPRESSED
OVERALL WIDTH17.0 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
SHIELD QUANTITY1
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
1462Interchangeable
interchangeable cross-reference
interchangeable
DY73AQS4Interchangeable
interchangeable cross-reference
interchangeable
RUS50RInterchangeable
interchangeable cross-reference
interchangeable
274485PC16Interchangeable
interchangeable cross-reference
interchangeable
2-229N1000-70Interchangeable
interchangeable cross-reference
interchangeable
AS568-229Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MT206PPTFG0LT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MT206PPTFG0LT?
MT206PPTFG0LT is a BEARING,BALL,ANNULAR.
What parts can replace MT206PPTFG0LT?
There are 28 known substitutes for MT206PPTFG0LT: 1462, DY73AQS4, RUS50R and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MT206PPTFG0LT?
MT206PPTFG0LT is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-5637. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MT206PPTFG0LT

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026