PartsTable
Technical Data Sheet
Download PDF

MT10244H200-12 — CLAMP,BLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MT10244H200-12: CLAMP,BLOCK.

The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: STEEL, overall_length: 4.766 INCHES NOMINAL4.766 INCHES NOMINAL IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S), clamping_hole_diameter: 2.000 INCHES NOMINAL ALL HOLES IN, mounting_hole_quantity: 33. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-512-3734, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MT10244H200-12
NSN: 5340-01-512-3734
FSC: 5340 — Hardware, Commercial
CAGE: 63330 — MARTINEZ AND TUREK, INC. DBA MARTINEZ & TUREK INC (USA)
SPECIFICATIONS
materialSTEEL
overall_length4.766 INCHES NOMINAL4.766 INCHES NOMINAL IN
style_designatorRECTANGULAR
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter2.000 INCHES NOMINAL ALL HOLES IN
clamping_hole_quantity2
mounting_hole_quantity33
cable_diameter_for_which_designed1.000 INCHES NOMINAL ALL HOLES IN
NSN5340-01-512-3734
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MT10244H200-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 33
•
CLAMPING HOLE QUANTITY: 2
•
STYLE DESIGNATOR: RECTANGULAR
•
CLAMPING HOLE DIAMETER: 2.000 INCHES NOMINAL ALL HOLES IN
•
CABLE DIAMETER FOR WHICH DESIGNED: 1.000 INCHES NOMINAL ALL HOLES IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)UNTHREADED HOLE(S)
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY33
CLAMPING HOLE QUANTITY2
STYLE DESIGNATORRECTANGULAR
OVERALL LENGTH4.766 INCHES NOMINAL4.766 INCHES NOMINAL IN
CLAMPING HOLE DIAMETER2.000 INCHES NOMINAL ALL HOLES IN
CABLE DIAMETER FOR WHICH DESIGNED1.000 INCHES NOMINAL ALL HOLES IN
MOUNTING FACILITYUNTHREADED HOLE(S)UNTHREADED HOLE(S)
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 3
HC-16-2-3Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
MT10244H200 DET 12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MT10244H200Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MT10244H200-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MT10244H200-12?
MT10244H200-12 is a CLAMP,BLOCK.
What parts can replace MT10244H200-12?
There are 3 known substitutes for MT10244H200-12: HC-16-2-3, MT10244H200 DET 12, MT10244H200. Substitute compatibility should be verified for your specific system.
What is the NSN for MT10244H200-12?
MT10244H200-12 is cataloged in the U.S. Government catalog under NSN 5340-01-512-3734. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MT10244H200-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.