PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MT10244E220 DET 13
MT10244E220 DET 13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_height: 3.750 INCHES NOMINAL IN, overall_length: 19.000 INCHES NOMINAL IN, features_provided: NOTCHED SLIDE, mounting_hole_type: PLAIN, mounting_hole_diameter: 2.840 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-515-7252, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MT10244E220 DET 13
NSN: 5340-01-515-7252
FSC: 5340
CAGE: 63330 — MARTINEZ AND TUREK, INC. DBA MARTINEZ & TUREK INC (USA)
SPECIFICATIONS
materialSTEEL
overall_height3.750 INCHES NOMINAL IN
overall_length19.000 INCHES NOMINAL IN
features_providedNOTCHED SLIDE
mounting_hole_typePLAIN
mounting_hole_diameter2.840 INCHES NOMINAL IN
mounting_hole_quantity3
end_item_identificationLTV, REAR DOLLY
part_name_assigned_by_controlling_agencyICC LIGHT BRACKET
NSN5340-01-515-7252
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MT10244E220 DET 13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 2.840 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
FEATURES PROVIDED: NOTCHED SLIDE
•
MOUNTING HOLE TYPE: PLAIN
•
MOUNTING HOLE QUANTITY: 3
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE DIAMETER2.840 INCHES NOMINAL IN
OVERALL LENGTH19.000 INCHES NOMINAL IN
MATERIALSTEEL
PART NAME ASSIGNED BY CONTROLLING AGENCYICC LIGHT BRACKET
FEATURES PROVIDEDNOTCHED SLIDE
OVERALL HEIGHT3.750 INCHES NOMINAL IN
MOUNTING HOLE TYPEPLAIN
MOUNTING HOLE QUANTITY3
END ITEM IDENTIFICATIONLTV, REAR DOLLY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
TCR300Interchangeable
interchangeable cross-reference
interchangeable
TCR100Interchangeable
interchangeable cross-reference
interchangeable
MR300Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MT10244E220 DET 13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MT10244E220 DET 13?
MT10244E220 DET 13 is a BRACKET,MOUNTING.
What parts can replace MT10244E220 DET 13?
There are 3 known substitutes for MT10244E220 DET 13: TCR300, TCR100, MR300. Substitute compatibility should be verified for your specific system.
What is the NSN for MT10244E220 DET 13?
MT10244E220 DET 13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-515-7252. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MT10244E220 DET 13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026