MS9844-23 — PIN,STRAIGHT,HEADED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

MS9844-23: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.035 INCHES NOMINAL IN, diameter: 0.1869 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM IN, material: STEEL COMP 615 OVERALL, head_style: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION), chamfer_length: 0.030 INCHES NOMINAL IN, surface_finish: 32.0 MICROINCHES OUTSIDE DIAMETER.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-015-0147, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS9844-23

NSN: 5315-01-015-0147
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

height	0.035 INCHES NOMINAL IN
diameter	0.1869 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM IN
material	STEEL COMP 615 OVERALL
head_style	PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
chamfer_length	0.030 INCHES NOMINAL IN
surface_finish	32.0 MICROINCHES OUTSIDE DIAMETER
hardness_rating	45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
style_designator	STRAIGHT
pin_chamfer_angle	20.0 DEGREES NOMINAL
pin_head_diameter	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
under_head_length	1.510 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
first_hole_diameter	0.065 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
NSN	5315-01-015-0147

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 32.0 MICROINCHES OUTSIDE DIAMETER

•

CHAMFER LENGTH: 0.030 INCHES NOMINAL IN

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

UNDER HEAD LENGTH: 1.510 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN

•

PIN CHAMFER ANGLE: 20.0 DEGREES NOMINAL

•

FIRST HOLE DIAMETER: 0.065 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN

•

HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL

•

STYLE DESIGNATOR: STRAIGHT

TECHNICAL CHARACTERISTICS

SURFACE FINISH	32.0 MICROINCHES OUTSIDE DIAMETER
CHAMFER LENGTH	0.030 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLE	ONE END DRILLED
UNDER HEAD LENGTH	1.510 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
PIN CHAMFER ANGLE	20.0 DEGREES NOMINAL
FIRST HOLE DIAMETER	0.065 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
HARDNESS RATING	45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATOR	STRAIGHT
PIN HEAD DIAMETER	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

SUBSTITUTES & CROSS-REFERENCES 1

732022-7Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy MS9844-23?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS9844-23?

MS9844-23 is a PIN,STRAIGHT,HEADED.

What parts can replace MS9844-23?

There is 1 known substitute for MS9844-23: 732022-7. Substitute compatibility should be verified for your specific system.

What is the NSN for MS9844-23?

MS9844-23 is cataloged in the U.S. Government catalog under NSN 5315-01-015-0147. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS9844-23 — PIN,STRAIGHT,HEADED

Request a Quote — MS9844-23