The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, first_leg_angle: 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM, first_leg_style: END RADIUS, first_leg_width: 0.500 INCHES NOMINAL IN, first_leg_length: 0.757 INCHES MINIMUM AND 0.767 INCHES MAXIMUM IN, second_leg_width: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-482-3263, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS9600-047
NSN:5340-01-482-3263 FSC:5340 — Hardware, Commercial CAGE:0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
material
STEEL CORROSION RESISTING
first_leg_angle
85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM
first_leg_style
END RADIUS
first_leg_width
0.500 INCHES NOMINAL IN
first_leg_length
0.757 INCHES MINIMUM AND 0.767 INCHES MAXIMUM IN
second_leg_width
0.500 INCHES NOMINAL IN
special_features
0.190 BOLT
style_designator
ANGLE
second_leg_length
0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN
first_leg_thickness
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
first_leg_end_radius
0.500 INCHES NOMINAL IN
second_leg_thickness
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
NSN
5340-01-482-3263
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.500 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
FIRST LEG ANGLE
85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG
IDENTICAL
SECOND LEG HOLE DIAMETER
0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
SECOND LEG WIDTH
0.500 INCHES NOMINAL IN
SECOND LEG LENGTH
0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLE
ONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9600-047?
MS9600-047 is a BRACKET,ANGLE.
What parts can replace MS9600-047?
There is 1 known substitute for MS9600-047: SAE-AS9600. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9600-047?
MS9600-047 is cataloged in the U.S. Government catalog under NSN 5340-01-482-3263. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.