PartsTable
Technical Data Sheet
Download PDF

MS9593-072 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS9593-072: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include angle: 0.125 RADIANS NOMINAL, material: STEEL CORROSION RESISTING, overall_width: 0.5 INCHES NOMINAL IN, overall_length: 0.875 INCHES NOMINAL IN, special_features: CRES AMS 5510,.190X.250 BOLT, material_thickness: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-609-1019, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9593-072
NSN: 5340-01-609-1019
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
angle0.125 RADIANS NOMINAL
materialSTEEL CORROSION RESISTING
hole_quantity1
overall_width0.5 INCHES NOMINAL IN
overall_length0.875 INCHES NOMINAL IN
special_featuresCRES AMS 5510,.190X.250 BOLT
material_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
mounting_hole_diameter0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
NSN5340-01-609-1019
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9593-072 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
ANGLE: 0.125 RADIANS NOMINAL
•
MATERIAL THICKNESS: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING
•
HOLE QUANTITY: 1
TECHNICAL CHARACTERISTICS
MOUNTING HOLE DIAMETER0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
OVERALL LENGTH0.875 INCHES NOMINAL IN
OVERALL WIDTH0.5 INCHES NOMINAL IN
ANGLE0.125 RADIANS NOMINAL
MATERIAL THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
SPECIAL FEATURESCRES AMS 5510,.190X.250 BOLT
MATERIALSTEEL CORROSION RESISTING
HOLE QUANTITY1
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS9593Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS9593-072?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9593-072?
MS9593-072 is a BRACKET,ANGLE.
What parts can replace MS9593-072?
There is 1 known substitute for MS9593-072: SAE-AS9593. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9593-072?
MS9593-072 is cataloged in the U.S. Government catalog under NSN 5340-01-609-1019. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9593-072

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.