PartsTable
Technical Data Sheet
Download PDF

MS9592-259 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS9592-259: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_length: 0.812 INCHES NOMINAL IN, style_designator: ANGLE, second_leg_length: 1.312 INCHES NOMINAL IN, end_item_identification: HYD INSTL, MDWG, AFT; MODEL CODE FOR THE V-22 AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-547-7692, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9592-259
NSN: 5340-01-547-7692
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
first_leg_angle90.0 DEGREES NOMINAL
first_leg_length0.812 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.312 INCHES NOMINAL IN
end_item_identificationHYD INSTL, MDWG, AFT; MODEL CODE FOR THE V-22 AIRCRAFT
NSN5340-01-547-7692
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9592-259 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG LENGTH: 1.312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG LENGTH: 0.812 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG LENGTH1.312 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
FIRST LEG LENGTH0.812 INCHES NOMINAL IN
END ITEM IDENTIFICATIONHYD INSTL, MDWG, AFT; MODEL CODE FOR THE V-22 AIRCRAFT
MATERIALSTEEL CORROSION RESISTING
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS9592Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS9592-259?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9592-259?
MS9592-259 is a BRACKET,ANGLE.
What parts can replace MS9592-259?
There is 1 known substitute for MS9592-259: SAE-AS9592. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9592-259?
MS9592-259 is cataloged in the U.S. Government catalog under NSN 5340-01-547-7692. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9592-259