Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.500 INCHES NOMINAL IN, first_leg_length: 0.825 INCHES NOMINAL IN, second_leg_style: END RADIUS. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-158-4188, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS9592-142
NSN:5340-00-158-4188 FSC:5340 CAGE:0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
material
STEEL COMP 321
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
END RADIUS
first_leg_width
0.500 INCHES NOMINAL IN
first_leg_length
0.825 INCHES NOMINAL IN
second_leg_style
END RADIUS
second_leg_width
0.500 INCHES NOMINAL IN
style_designator
ANGLE
second_leg_length
1.700 INCHES NOMINAL IN
first_leg_thickness
0.055 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
first_leg_end_radius
0.500 INCHES NOMINAL IN
second_leg_thickness
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
NSN
5340-00-158-4188
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG STYLE: END RADIUS
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
MATERIAL: STEEL COMP 321
•
STYLE DESIGNATOR: ANGLE
•
SECOND LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG STYLE
END RADIUS
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
MATERIAL
STEEL COMP 321
STYLE DESIGNATOR
ANGLE
SECOND LEG HOLE DIAMETER
0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9592-142?
MS9592-142 is a BRACKET,ANGLE.
What parts can replace MS9592-142?
There are 8 known substitutes for MS9592-142: MS9592-009, SAE-AS9592, MS9592-138 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9592-142?
MS9592-142 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-158-4188. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.